Description
Create your own funky designs for your iphone or for your customers.
Phone case is made of TPU (thermoplastic polyurethane) and PC (polycarbonate) with an aluminium backing plate.
Black cover.
Instructions
- Create your design to phone measurements adding 2mm to each side.
- Print Image in reverse
- Remove Protective film from the aluminum backing before pressing the design.
- Use heat tape to apply the sublimated design onto the backing.
- Press with a high pressure at 180 C for 45 to 60 seconds depending on your heatpress.
- Always wear heat gloves as the aluminum gets very hot.
- Once cool remove sublimation paper and take protective slip off phone cover and stick the aluminum sheet on the sticky part of phone.
Image shown is just an example of the covers, each phone cover will change in design to suit the model you are purchasing.
Please note that if you have a protective cover on your phone camera it may not fit these cases.
